Part 4. Examining Process

Chapter 19. Liability Determination

Section 20. Automated Correspondence Exam (ACE) Processing Overview

4.19.20 Automated Correspondence Exam (ACE) Processing Overview

Manual Transmittal

December 17, 2024

Purpose

(1) This transmits revised IRM 4.19.20 Liability Determination, Automated Correspondence Exam (ACE) Processing Overview.

Scope

This IRM section contains information on procedures and administrative matters relative to Examination Report Generation Software (RGS).

Material Changes

(1) IRM 4.19.20.2(6), Automated Correspondence Exam Overview (ACE), Added timeframes to address cases in Groups B1 and B2.

(2) IRM 4.19.20.9, Reviews, Reduced the requirement for weekly ACE reviews. IPU 24U0804 issued 06-26-2024.

(3) Revisions made throughout the IRM to replace Wage and Investment (W&I) with Taxpayer Services (TS). IPU 24U0804 issued 06-26-2024.

(4) Minor grammatical corrections made throughout the IRM.

Effect on Other Documents

IRM 4.19.20 dated December 4, 2023(effective January 1, 2024) is superseded.

Audience

Taxpayer Services (TS) and Small Business/Self-Employed (SB/SE) Examination

Effective Date

(01-01-2025)

Ishmael Alejo
Director, Refundable Credits Program Management
Taxpayer Services

4.19.20.1 (01-01-2023)

Program Scope and Objectives

  1. Program Overview: Automated Correspondence Exam (ACE) is an IRS developed, multifunctional software application that fully automates the initiation and movement of Earned Income Tax Credit (EITC) and Non-EITC cases through the audit process.

  2. Purpose: This IRM provides guidance to personnel responsible for overseeing the daily functioning of the ACE processing system.

  3. Audience: Taxpayer Services (TS) and Small Business/Self-Employed (SB/SE) Examination.

  4. Policy Owner: The Director of Refundable Credits Program Management (RCPM),Taxpayer Services and The Director of Operations Support, Small Business/Self Employed (SB/SE).

  5. Program Owner: The Director of Refundable Credits Program Management (RCPM).

  6. Primary Stakeholders: Taxpayer Services, Small Business/Self Employed (SB/SE).

  7. Contact Information: To recommend changes or make any other suggestions for this IRM section send an email to the IRM author or utilize the SERP Feedback Application.

4.19.20.1.1 (12-13-2018)

Background

  1. In 2007, the ACE system replaced Batch Processing (BP). ACE was created to process specified cases with minimal to no tax examiner (TE) involvement until a reply is received from the taxpayer. ACE processes cases from the issuance of the Initial Contact Letter (ICL) through the Statutory Notice of Deficiency until closing. Cases can be reintroduced into ACE after a reply has been reviewed.

4.19.20.1.2 (01-01-2023)

Authority

  1. Congress has delegated to the IRS the responsibility of administering the tax laws, known as the Internal Revenue Code, found in Title 26 of the United States Code.

  2. As IRS, Tax Examination employees, we must provide the best possible service to the public and are expected to perform our duties with integrity and fairness to all. See Policy Statement 1-236, Fairness and Integrity in Enforcement Selection at General News - Policy Statement 1-236, Fairness and Integrity... (irs.gov).

4.19.20.1.3 (12-14-2020)

Acronyms

  1. Some acronyms used in Examination are listed below:

    ACA Affordable Care Act
    ACE Automated Correspondence Exam
    ACTC Additional Child Tax Credit
    AIMS Audit Information Management System (IDRS)
    BOD Business Operating Division - the four divisions are:

    • TS - Taxpayer Services

    • LB&I - Large Business and International

    • SB/SE - Small Business /Self Employed

    • TE/GE - Tax Exempt/Government Entities
    CEAS Correspondence Examination Automation Support
    CII Correspondence Imaging Inventory
    IAT Integrated Automated Technologies
    RGS Report Generation Software
    RIVO Return Integrity Verification Operation
    SNOD Statutory Notice of Deficiency
    TIN Taxpayer Identification Number
    TY Tax Year

  2. Additional Acronyms can be found on Acronyms Database (irs.gov).

4.19.20.1.4 (12-16-2019)

Related Resources

  1. Other IRMs related to the Examination Process are listed.

    • IRM 4.19.10, Examination General Overview

    • IRM 4.19.11, Examination Classification of Work

    • IRM 4.19.12, Centralized Files and Scheduling

    • IRM 4.19.13, General Case Development and Resolution

    • IRM 4.19.14, Refundable Credits Strategy

    • IRM 4.19.15, Discretionary Programs

    • IRM 4.19.16, Claims

    • IRM 4.19.19, Campus Examination Telephones Contacts

    • IRM 4.19. 21, Clerical

4.19.20.2 (06-26-2024)

Automated Correspondence Exam Overview (ACE)

  1. Automated Correspondence Exam (ACE) is an IRS-developed, multifunctional software application that fully automates the initiation, Aging and Closing of certain Earned Income Tax Credit (EITC) and Non-EITC cases. Using ACE, Correspondence Exam can process specified cases with minimal to no tax examiner (TE) involvement until a taxpayer reply is received. Because the ACE system will automatically process the case through creation, statutory notice and closing, TE involvement is eliminated entirely on no-reply cases. Once a taxpayer reply has been considered, the case can be reintroduced into ACE for automated Aging and Closing in most instances.

  2. ACE processing provides the service with four significant capabilities:

    • Audit cases can be processed without TE involvement until taxpayer correspondence is received, unless a case filters out or manual classification is required.

    • ACE will, on a weekly basis, create inventory records and case data (address and return information) for every case that has been opened on the Audit Information Management System (AIMS).

    • ACE initiated cases can be reintroduced (returned to ACE after being removed for mail processing or case correction) to ACE Group B0 for systemic Aging and Closing, if the case is a Project Code that goes through Create II.

    • After the report is created, manually initiated cases can be introduced to ACE Group B0 for systemic Aging and Closing. If the case is a Project Code that goes through Create II, it can be manually created and introduced in Status 10 and then aged through Create II.

  3. Within ACE, the following actions take place automatically without human intervention.
    1. ACE Create

    • Inventory records are created.

    • Report Generation Software (RGS)/work center files are created.

    • Audit issues are created.

    • Tax is computed.

    • Initial Contact Letters (ICL) and reports are generated (Letter 525, Form 886-H, Form 11652, Form 4549, Form 886-A).

    • AIMS update records are generated.

    • Suspense date to trigger the next action, either Create II or Statutory Notice of Deficiency is entered in RGS.


    2. ACE Create II

    • Tax is computed.

    • No Reply Letters (Letter 525, Form 886-H, Form 11652, Form 4549, and Form 886-A) and reports are generated on cases that received a CP 75 notice series letter on EITC cases or a Letter 566-S on a Discretionary case as an ICL.

    • AIMS update records are created.

    • Suspense date to trigger the Statutory Notice of Deficiency issuance is entered in RGS.


    3. Aging

    • AMSTUS request for Statutory Notice generation using either;

    • STN 01 program (local mail out of Statutory Notice).

    • STN 02 program (Correspondence Production Services (CPS) mail out of Statutory Notice).


    4. ACE Closing

    • Form 5344 is generated.

    • Closing process is run by ACE Coordinator or a designated clerk to interface with Integrated Data Retrieval System (IDRS).

    • Cases are archived.

    Note:

    In most instances, cases in Statuses 10, 22, 23, 24, 25, and 53 can be reintroduced into the ACE process for automated Aging and Closing.

  4. CPS provides printing, inserting, sorting and mailing of IRS notices. The two consolidated print sites are CPS East in Detroit and CPS West in Ogden. The campuses are aligned to a print site based on their location (see chart below).

    CPS East -- Detroit CPS CPS West -- Ogden
    Andover Austin
    Atlanta Fresno
    Brookhaven Kansas City
    Cincinnati Ogden
    Philadelphia  
    Memphis  

  5. How CPS works at the ACE Stage - Each case is systemically reviewed to determine if the individual package meets the print requirements (the individual package is within the 15 printed page limit (3 oz.)) and the required schedules are templated for CPS. If the case meets these requirements, it is marked for processing through CPS. If the case does not meet these requirements it is marked for local mail out through print manager.
    If the ICL package is processed through CPS:

    • The ICL package will be printed and mailed by the CPS site on the 3rd Monday after the Create program is run.


    If the ICL package is not mailed through CPS:

    • The ACE Created letter and report will create in the Print Manager Program for local printing and mailing.

  6. Weekly files are received for cases selected through Dependent Database (DDB) pre-refund filters, as well as for Recertification cases, Pickup cases, AM424 files and the Tickler Files. They are assigned to one of three groups used in ACE processing. See below:

    ACE Group Actions Description
    B0 Cases from all ACE processes may be filtered to or assigned to this group. The process systemically:

    • generates the letters and reports for mailing or review

    • computes tax

    • creates RGS work center files (RTF data, etc.)

    • creates an inventory record in RGS Groups B0, B1 or B2

    • inputs RGS case history items

    • updates the RGS summary record (with four tabs: updateable data, case data; return information and historical data)

    • inputs RGS issues with associated paragraphs, mandatory issues, work paper notations and penalty consideration

    • generates reports (found in UCP and Print Manager)

    • generates pending AIMS updates
    B1 Cases from ACE processes may be filtered to or assigned to this group. Some cases are directed to Group B1 for manual input of the issues and creation of the letters and reports by the examiners. Rejects may be directed to this group. Cases should be addressed and the ICL issued within 30 days of the case filtering to B1.
    B2 Cases from ACE processing may be filtered to or assigned to this group. Some cases are directed to Group B2 for programs that require a report to be sent with the initial contact letter. The report must be reviewed prior to issuance to the taxpayer. Other cases are filtered to Group B2 and require a reject condition and an associated notice. Cases should be addressed and the ICL issued (if applicable) within 30 days of the case filtering to B2.

  7. The first step in ACE processing is the filter process. B0 processing is suspended on all cases meeting an unresolved filter condition.

    • Cases originally created in Group B0 will default to Group B2 if they encounter a filter condition.

    • Cases originally created in Group B2 will remain in Group B2 even if they encounter a filter condition.

  8. The following is the list of Exam project codes that are currently processed:

    Project Code Type of Case EITC Disallowed Schedule C Disallowed RGS Grp
    0000 (SC 26) Alternative Minimum Tax NO NO B2
    0027 EITC Recertification with proposed 2 - year ban YES NO B0
    0028 EITC Recertification – Schedule C with proposed 2 - year ban YES YES B0
    0029 EITC DDB Pickup YES NO B0
    0058 EITC Dup TIN Pickup “Related Party” YES NO B0
    0059 Related pickup of Non-EITC Dup TIN NO NO B0
    0061 EITC DDB Pickup YES NO B0
    0097 Non-EITC Dup TIN Dependent claimed by more than one taxpayer NO NO B0
    0098 Non-EITC Dup TIN TP claimed himself and so did another NO NO B0
    0099 DDB - EITC & FTHBC YES NO B0
    0123 10% Individual Retirement Account (IRA) NO NO B2
    0124 Self-Employment Tax NO NO B2
    0141 Alimony Paid - TIN NO NO B0
    0173 Questionable Refund Program (QRP) Schedule C/EITC YES YES B0
    0231 Alimony - Payer NO NO B0
    0257 Schedule C - Recertification YES YES B0
    0259 Non EITC DEP/DEP (FS) NO NO B0
    0260 Non EITC DEP/PRT w/ Filing Status Issue NO NO B0
    0261 EITC DDB (Pre-Refund) Yes NO B0
    0277 Non-Filer NO NO B0
    0288 Schedule C-Disallowance YES YES B0
    0289 DDB EITC YES NO B0
    0291 EIC - Native American YES NO B0
    0292 EIC -Native American with Schedule C Net Profit YES YES B0
    0381 Employee Business Expense NO NO B0
    0578 Late Filed EITC Certifications YES NO B0
    0579 Filing Status YES YES B0
    0580 EITC Post Refund YES NO B0
    0584 EITC QRP One False income document IDOC YES NO B0
    0585 Single Issue Audit/Control Group YES NO B0
    0586 EITC Single Issue- Post Refund YES NO B0
    0587 EITC Dup TIN Pickup YES NO B0
    0603 EITC QRP General Agreement of Tariffs and Trade (GATT) YES NO B0
    0621 Dependent Database – Post Refund YES NO B0
    0623 EITC Schedule C Full Scope Pre-Refund YES YES B0
    0624 EITC Schedule C ALLOWABLE PROFIT for Tax Year 2001 YES YES B0
    0628 Child Tax Credit YES YES B0
    0629 Schedule A Contributions NO NO B0
    0631 Alternative Minimum Tax NO NO B2
    0639 Schedule A Deductions NO NO B0
    0652 EITC Dup TIN Repeater (Same child claimed by more than one person) YES NO B0
    0694 EITC Recertification YES NO B0
    0697 2 Year EITC Ban YES NO B0
    0698 10 Year EITC Ban YES NO B0
    0903 EITC Recertification Pickups YES YES B0
    0906 SB Full Scope Schedule C Pickups YES YES B0
    0907 SB EITC Recertification Schedule C Pickup YES YES B0
    0908 SB EITC Schedule C only Pickup YES YES B0
    0909 SB EITC Full Scope No Schedule C Pickup YES NO B0
    1300 Premium Tax Credit Pre-Refund YES NO B0
    1301 Premium Tax Credit EITC Pre-Refund YES NO B0
    1302 Premium Tax Credit EITC & Sch. C Pre-Refund YES YES B0
    1303 Premium Tax Credit QRP Pre-Refund NO NO B0
    1304 Premium Tax Credit QRP & Sch. C Pre-Refund NO YES B0
    1305 Premium Tax Credit EITC Recert Pre-Refund YES NO B0
    1306 Premium Tax Credit EITC Recert & Sch. C Pre-Refund YES YES B0
    1307 Premium Tax Credit EITC Native American Pre-Refund YES NO B0
    1308 Premium Tax Credit EITC Native American & Sch. C Pre-Refund YES YES B0
    1309 Premium Tax Credit EITC DupTin YES NO B0
    1312 Premium Tax Credit EITC Pre-Refund YES NO B0
    1313 Premium Tax Credit Proposed 2-yr Ban YES NO B0
    1314 Premium Tax Credit Proposed 2-yr Ban Sch. C YES YES B0
    1315 Premium Tax Credit EITC 2-yr Ban YES NO B0
    1316 Premium Tax Credit EITC 10-yr Ban YES NO B0
    1317 Premium Tax Credit EITC Pickup YES NO B0
    1318 Premium Tax Credit EITC Sch. C Pickup YES YES B0
    1319 Premium Tax Credit EITC Post Refund YES NO B0
    1320 Premium Tax Credit EITC & Sch. C Post Refund YES YES B0
    Claims        
    0367 EITC Amended Return Project B0
    SC 30 Claims introduced into ACE after manual ICL B0

  9. The following list of filters are currently applied to cases in ACE . The parameters can be changed through the use of the Filter Configuration Tool. Analysts in Both SB/SE and W&I have access to make needed changes. Application of filters can be changed at any time.

    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡   ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡   ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡

    • ≡ ≡ ≡ ≡ ≡

    		 ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
    ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡

4.19.20.2.1 (01-01-2023)

B0 – ACE Create/Tax Computation

  1. The ICL for EITC cases is the CP 75 notice series. The ICL for Discretionary cases is the Letter 566-S. The CP 75 notice series also serves as the refund delay letter. The CP 75 notice series and Letter 566-S address the specific issues selected for examination on the return, and include the appropriate paragraphs describing the documentation needed to substantiate the issues under examination. No report (Form 4549) is issued as part of the CP 75 notice series or Letter 566-S mail out. The CP 75 notice series will be generated at master file, while the Letter 566-S package will be generated during Create I for CPS mailing. As a result of this ICL processing, the ACE Create process is broken down to two separate processes.

    • ACE Create I

    • ACE Create II


    Only programs which use the CP 75 notice series or Letter 566-S as the ICL require both Create I and Create II processing.

    Letter 2194, Letter 1862, and Letter 525 with report Form 4549 are used as the ICL on some of the other Discretionary programs. Programs using these letters for initial contact will only process through Create I.

    For those programs where the ICL is the CP 75 notice series, or the Letter 566-S , the ACE Create I process will:

    • Create Inventory Records

    • Create Program related Issues and paragraphs

    • Create History Items

    • Create pending AIMS update to Status 10

    • Create appropriate suspense dates, based on the type case



    When the Create II process runs, it will identify those cases in Status 10 with the appropriate suspense date for generating the Letter 525 and report, Form 4549.

    For those programs where the Letter 566-B, Letter 2194, or Letter 525 with report is the ICL, the Create I process will:

    • Create Inventory Records

    • Create Issues and paragraphs

    • Create History Item

    • Create pending AIMS update to Status 22

    • Create appropriate suspense date, based on the program

    • Route the case to Group B2 for review and future processing if necessary

  2. The system will consist of four user profiles - ACE Create Examiner, ACE Create Clerk, ACE Aging Clerk and ACE Closing Clerk. See chart below:

    Description Profile
    ACE Create Examiner profile, Group B0 and B2 Use this profile when interfacing ICL stage
    ACE Aging Clerk profile Group B0 Use this profile when interfacing aging/Statutory Notice of Deficiency (SNOD)
    ACE Closing Clerk profile Group B0 Use this profile when interfacing closing
    ACE Create Clerk Group B1 Used to create the RGS skeletal records for manual cases

  3. Cases created in Group B0 will have actions automated and the ACE Create process will:

    • Create Inventory Records

    • Create work center files with address and return information

    • Create program related issues

    • Create ACE History

    • Create Statutory Adjustment Issues

    • Compute Tax

    • Notate Case History and work papers with automated actions

    • Generate AIMS update records

    • Generate inventory and filter reports

    • Generate and save local or CPS print file for letters and reports (Letter 566-B, Form 4549), Form 886-H (Various), Form 14824 (beginning in TY 2021), Form 886-A, and Form 11652 or the Letter 566-S package with the appropriate Form 886-A

    • Generate inventory and filter reports

    • Send automated emails with inventory summary reports

  4. The Filter process is run in Tennessee Computing Center (ECC-MEM), and individual tickler files are sent to the sites for processing. The cases are created using the ACE Create Examiner profile. The following RGS Case Summary Record fields are updated during the ACE Create I process:

    • Status Code updated to Status 10 or 22 (depending on letter stream)

    • Status date updated to the letter date of the CP 75 notice series or other ICL

    • Employee Group Code (EGC) updated to the EGC from the Return Transaction File

    • Project code (PC) updated to the PC on the Return Transaction File

    • Action text updated to read ICL

    • Action date updated to ACE run date

    • Type Code updated to "I" to reflect Initial contact

    • Suspense date updated to the letter date plus 30 or 45 days depending on the program requirements

    • Assignment to the ACE Create Examiner

  5. The Create II Unattended Case Processing (UCP) filter process is run in ECC-MEM and the RGS System Administrator (SA) will run the Create II Tickler files. The following actions are taken during the ace Create II process:

    • Status Code updated to Status 22

    • Status date updated to the letter date (third Monday following the week the ACE program is run)

    • Action text updated to read Letter 525

    • Action date updated to Letter date

    • Type Code updated to ‘I’ to reflect Initial contact

    • Suspense date updated to the letter date plus 30 or 45 days depending on the program requirements

      Note:

      If correspondence is received prior to the trigger date, the Letter 525 will need to be deleted from Print Manager. In addition the AIMS update will need to be rejected from the approval screen to prevent the record from updating.

4.19.20.2.2 (12-16-2019)

Filter Criteria - ACE Create Group B0

  1. ECC-MEM runs the UCP filter process which identifies certain conditions that exist on the module and displays the filter condition on the inventory/filter reports. Based on the condition, the case may be created in Group B0 or Group B2.

  2. Cases can either

    • Reject to group B2 or B1 for correction – if the filter condition requires correction or manual processing, or

    • Remain in B0 and have the filter condition notated on a separate listing.

  3. For filter conditions see IRM 4.19.20.2.

4.19.20.2.3 (01-01-2007)

B1 ACE Create Only

  1. Cases in B1 inventory have limited automated actions and therefore require manual initiation. The following actions take place during B1 Create:

    • Creation of inventory records

    • Creation of work center files with address and return information

  2. Many of the manually initiated project codes can be introduced into ACE Group B0 to take advantage of the automated Statutory Notice of Deficiency and closing functions.
    If all of the following conditions apply, the non-ACE started project codes can successfully be introduced to Group B0:

    1. The ICL and report have been created and mailed to the taxpayer

    2. The case does not contain a filter condition, as outlined in IRM 4.19.20.2.4, B2 ACE Create/Tax Computation/Manual Review of Reports, that would cause the case to reject at the Statutory Notice or Closing process

    3. The case is correctly updated on RGS and AIMS

    Caution:

    If project codes are identified that could potentially be introduced to Group B0, test a few cases at the Aging and Closing stages to be sure that the letters and reports are accurate before you move a large quantity of inventory into the automated Group B0.

4.19.20.2.4 (12-14-2020)

B2 ACE Create/Tax Computation/Manual Review of Reports

  1. During the ACE Create processes, cases meeting certain filter conditions will be created in Group B2. These cases will appear on an inventory/filter listing, on the CEAS UCP website, with literals identifying all filter conditions that caused the case to be created in Group B2. Cases do not reject to Group B1 during the create process for a filter condition. They are created in Group B2 with all included B2 automation.

  2. Cases filtered from the Create I process fall into two categories:

    • Project codes with a CP 75 notice series

    • Project codes with Letter 566-S as the ICL and a status code update to 10, or Project codes with reports and a Status code update to 22.



    Project codes where the CP 75 notice series or Letter 566-S is generated will have an AMSTU update to Status 10. The update will need to be interfaced with AIMS. There are no reports generated on these cases, but the Letter 566-S will have packages that should be reviewed for accuracy.

  3. All other cases will have the ICL and report systemically generated. An AIMS update to Status 22 will be sent to the Need Approval Screen. Reports need to be reviewed aided by the literals on the filter listing.

    1. If the report is correct the letter will be printed and mailed locally. The ACE Coordinator will continue with the AIMS interface to update the status. If the case has no potential rejects, it may be reintroduced to B0 to continue ACE processing.

    2. If the report is incorrect, it must be assigned to an examiner who will take the following steps:

      1. Delete the incorrect report and letter from the Case Files Documents folder.
      2. Revise the report and save as a .pdf in the Case Files Documents folder.
      3. Print and mail the letter.
      4. Ensure that the mailout date matches the pending AIMS update (If it does not match, the ACE coordinator must delete the pending update so the examiner can create the correct one).
      5. Forward the case to group B0 if it has no potential rejects.

  4. Cases filtered from the Create II Process to Group B2 will have the ICL and report systemically generated. These cases are the second phase of the CP 75 notice series or the Letter 566-S process. Tax examiners must review the reports from each Group B2 case, aided by the literals on the filter listing.

    If a determination is made to mail the ACE created letter and report, the letter is generated locally using the print manager function. The RGS Coordinator should place the original package in the case file document folder. If it is determined the original package will not be mailed, the case needs to be corrected. The tax examiner will prepare the letter and report and save the pdf files to the Case File Documents so that they can be accessed in CEAS. If there are no reject conditions, the case may be reintroduced to the ACE process.

  5. Cases meeting any of the established filter conditions will be filtered from Group B0 ACE Create to Group B2 and the condition will be displayed on the filter/inventory listing. The filter/inventory listing will display the literal of all filters encountered. Therefore, a case may have several literals. All of them must be corrected before a case is reintroduced to ACE processing.

  6. The ACE filter process will also get information from CFOL. These cases are created in Group B0.

4.19.20.2.5 (01-08-2015)

Status Updates - Interfacing with AIMS using the Legacy Access Provider (LAP)

  1. During the ACE Create I process, cases receiving an ICL in Groups B0 and B2 will have an AIMS request generated in RGS to update AIMS to Status 10. After the ACE Create process is completed, the Legacy Access Provider (LAP) process must be run to update AIMS. Coordination between the ACE Coordinator and the local System Administrator is necessary to reduce problems with the ACE process.

    • Do Not run the LAP process for Status 10 updates while the ACE Create process is running.

    • Do Not run the LAP process for the Status 10 updates on the same day as the Status 10 date.

    • Do Not run the LAP interface before the AIMS database goes to full display, or the request will be rejected.

    The LAP interface should be run on the Friday following the ACE Create process for the ACE Create Status 10 updates.

  2. During the ACE Create process, cases receiving a report as first contact, in Groups B0 and B2, an AIMS request is generated in RGS to update AIMS to Status 22. After the ACE Create process is completed, the LAP process must be run to update AIMS. Coordination between the ACE Coordinator and the local System Administrator is necessary to reduce problems with the ACE process.

    • Do Not run the LAP process for Status 22 updates while the ACE Create process is running.

    • Do Not run the LAP process for the Status 22 updates on the same day as the Status 22 date.

    • Do Not run the LAP interface before the AIMS database goes to full display, or the request will be rejected.

    The LAP Interface should be run on the Monday following the ACE Create process for the ACE Create Status 22 updates.

    Note:

    If the case is removed/rejected from the CPS transmission you should remove the pending update (shown with a "P" on the RGS record) before the interface is done. This will prevent AIMS from being updated incorrectly.

4.19.20.2.6 (03-09-2022)

Aging

  1. The ACE Aging process takes place in Group B0 and accomplishes the following actions:

    • Identifies Group B0 inventory in Status 22, 23, or 25, where the suspense dates are ready to age to Status 24. The Aging program searches for all cases that are prior to and 8 days forward from the day the Aging program is run

    • Searches inventory for cases in Status 53 (previously rejected from ACE, Status 24)

    • Creates warning lists

    • Filters cases to Group B1 if a filter condition is met and the case is ready to age

    • Creates filter reject lists for cases in Group B1

    • Automates aging from Status 22, 23, 25 or 53 to 24

    • Generates AMSTUS (Status 24) AIMS update record

    • Generates print job and saves copy of Form 4549 and Form 886-A in the case file documents folder

    • Generates ACE AMSTUS Inventory Reports

    • Generates the AMSTUS request for Statutory Notice of Deficiency generation through the STN 01

    • Identifies and "marks" cases that will process through STN 02

    • Requests Statutory Notice generation through STN 01 for cases not going to CPS (STN information explanations below) Requests Statutory Notice generation through STN 02 to the CPS site

    Note:

    If the case is removed/rejected from the CPS transmission, remove the pending update (shown with a "P" on the RGS record) before the interface is done. This will prevent AIMS from being updated incorrectly.

    Note:

    Once the case is reintroduced into Group B0 the Aging program will recognize Status 53 and it will be picked up for aging to Status 24 the next time it is run.

  2. How CPS works at the Aging (Statutory Notice) stage: When the ACE Aging filters (STN Filter program) are run, the program identifies the usual "filter reject conditions" and moves the case to Group B1 for TE action. It also reviews each case to determine if the individual package meets the requirements for inclusion in CPS. If the case meets the CPS requirements, it is marked for processing through the STN 02 process. If either of the conditions is not met, the case will not be processed through CPS and the case is processed through the STN 01 process.

    If the Statutory Notice of Deficiency package is processed through STN 02/CPS:
    1 The ACE created letter and report will be printed and mailed by the CPS site.
    2 The Statutory Notice and report package will be printed and mailed by the CPS site on the 3rd Monday after the Aging program is run.
    3 The RGS and AIMS Status date will be the 3rd Monday date.
    If the Statutory Notice of Deficiency package is generated through STN 01:
    1 A Statutory Notice file will print locally and the report will be created in the Print Manager Program for local printing and mailing.
    2 The Statutory Notice will be dated for the following Friday after the Aging program is run.
    3 The RGS and AIMS Status date will be the following Friday date.
    4 Cases processed through STN 01 will be automatically updated on RGS to Status 2491.

  3. The following RGS Case Summary Record fields are updated during the ACE Aging process:

    Status Code to 24 (if additional 2 digits of the Status Code are present on Status 22, they will also display on Status 24):
    1 Status Date to the date of the 90 Day Letter
    2 For STN 01 cases – Action text updated to Auto Statutory
    3 For STN 02 cases – Action text updated to Auto Statutory NPS
    4 Action Date to ACE run date
    5 Suspended date to the letter date plus 105/165

  4. The ACE Aging program provides a copy of the report for the Statutory Notice mail out package in one of two ways.

    Extracted:
      The report for ACE Aging will be extracted if the following conditions apply:
    1 If the original report was created by ACE,
    2 the "RAR_mmddhhmmss.pdf" is present in the Case File Doc folder,
    3 the Tax Comp run date/time is earlier than date/time of the "RAR_mmddhhmmss.pdf" ,
    4 the Status on the RGS Case Summary record is not 23XX,
    5 then a copy of the report will be extracted from the original ACE created PDF file.
     
    Regenerated:
      The report for ACE Aging will be regenerated based on the Forms/Schedules that are present in the Reports/Tax Computation screen for the following situations:
    1 The ACE created PDF file "RAR_mmddhhmmss.pdf" is not present in the Case File Documents folder
    2 The Status on the RGS Case Summary record is 23XX (this is regardless of whether the ACE Created PDF file is present or not)
    3 The ACE Created PDF file "RAR_mmddhhmmss.pdf" is present in the Case File Documents folder, but the Tax Comp run date/time is later than the date/time on the ACE created PDF file.
    If the additional two digits of the Status Code are present at the time of the ACE AMSTUS Aging process, it will update the Status in RGS to 2498.

    Note:

    XX99 should not be used prior to the issuance of the Statutory Notice of Deficiency. The Technique Code 7 means Undeliverable Statutory Notice.

    Caution:

    If the case is being updated to Status 2598 (reply report not revised) and the report was previously revised and in Status 23, then the PDF file in the Case File Documents folder must be deleted. Also, delete the PDF (if it exists) file from the Case File Documents folder.

  5. Warning lists will be generated for cases in Group B0 in Statuses 22, 23 or 25 with a Suspend Date within 24 days from the current date. The listing will display the number of days in Status 22, 23, or 25, and if there is a filter condition present. Cases with filter conditions should be reviewed and resolved within two weeks of the running of the AMSTUS process.

    • Review the warning lists weekly for all reject conditions and take actions needed to resolve the issue (i.e., make correction and place case back into B0 or work manually).

    • Identify cases with a Power of Attorney (POA)/Taxpayer Information Authorization (TIA) on file.

    • Update the Report Generation Software (RGS) Contacts section to reflect the name, address and other relevant information shown on CAF. Check the POA box to ensure that the Letter 937 and copy of the correspondence letter is generated to be sent to the authorized POA on file.

    Note:

    Ensure Letter 937 is always saved in RGS Case File Documents when issued to the taxpayer.

  6. Command Code AMSTUS will be generated for each case in Group B0 in Status 22, 23, or 25 where the suspense date indicates that the case is ready to age to Status 24. The Aging program searches for all suspense dates prior to and 8 days forward from the day the Aging program is run.

    • The filter program searches the Taxpayer Information File (TIF) and Corporate File On-Line (CFOL) for each case for conditions that would require a tax examiner to take additional action.

      If the filter condition cannot be resolved (i.e., EGC, TC 290, Z Freeze) the ACE program will not automate the Statutory Notice and non-ACE procedures should be used to issue the Statutory Notice.

    • Cases with a filter condition will automatically be reassigned to Group B1.

4.19.20.2.6.1 (12-16-2019)
Taxpayer Correspondence Received PRIOR TO the Issuance of the Statutory Notice of Deficiency Non-CPS

  1. If taxpayer correspondence is received for cases in ACE Group B0, and the case Status is 10, 22, 23, or 25:

    1. Reassign case from Group B0.

    2. After the case is received in the Correspondence Group, make the following updates to RGS and AIMS using the LAP process, and reassign the case to an examiner. See the update and value table below:

      Update Value
      Status Code 54, 55, 57
      Status Date Leave blank
      Correspondence Received Date Earliest IRS received date of taxpayer's response
      Action Text Local decision
      Employee Group Code Correspondence Group Code
      RGS Group Corresponding one to EGC

      Note:

      Follow general Examination program guidelines and procedures when evaluating taxpayer correspondence.

  2. If, after evaluation of the taxpayer correspondence, the examination remains open, the case will be reintroduced to ACE processing for aging. Review the taxpayer's account for filter conditions. If there is a filter condition present, do not reassign the case to Group B0.

    Note:

    If there is a penalty assessed on the case and the penalty has been calculated within RGS, the case can be reassigned to Group B0 for the automated Aging/AMSTUS process. The ACE/Aging/AMSTUS process will recognize the correct penalty to input on the Statutory Notice of Deficiency.

  3. Update RGS and AIMS using the LAP process as follows:

    Update Value
    Status code 2298 - if Status prior to 54, 55, 57 was 10
    2398 (Revised Report) or
    2598 (Report not Revised)
    Status date Date of letter for Status 2298
    Date of letter for Status 2398.
    Leave blank for Status 25
    Suspend date See Taxpayer Responses in IRM 4.19.13.11, Taxpayer Replies
    Action text Description of action taken
    Employee Group Code EGC determined by campus
    RGS Group B0

    Note:

    Updating the RGS Case Summary Record with an additional two digits will generate the correct disposal code and technique code for the ACE Closing process. The cases will remain in group B0 but MUST have the proper Status Code on RGS to close with the correct Blocking Series, Technique and Disposal Code information on Form 5344.

4.19.20.2.6.2 (01-08-2015)
Taxpayer Correspondence Received AFTER the Issuance of the Statutory Notice of Deficiency Non - CPS Generated Mailing

  1. If taxpayer correspondence is received for cases in ACE Group B0, after the Statutory Notice is issued,

    1. Reassign case from Group B0.

    2. After the case is received in the Correspondence Group, make the following updates in the tables below to RGS and AIMS using the LAP process, then reassign the case to an examiner:

    Update Update Value
    Status Code Update to Status 2498 (in RGS Only) if Taxpayer correspondence received while case in Status 24
    Status Code Update to Status 2497 (in RGS Only) if the 90 Day letter was returned "Unclaimed" or "Refused." Do not update the case to 2497, if already in 2498, because the taxpayer replied during the examination.
    Status Code Update to Status 2499 (in RGS Only) if 90 Day letter is returned "Undeliverable" and no new address can be secured. Do not update to 2499, if already in 2498, the taxpayer replied during the examination.
    Correspondence
    (only when updating to 2498)    		 Earliest IRS received date of the taxpayer's response
    Action Text Description of action taken
    Employee Group Code Group code of Correspondence unit to which the case is assigned – if mail is being assigned for review
    RGS Group Corresponding one to EGC

    Note:

    Updating the RGS Case Summary Record with an additional 2 digits will generate the correct disposal code and technique code for the ACE Closing process. The cases will remain in group B0 but MUST have the proper Status Code on RGS to close with the correct Blocking Series Technique and Disposal Code information on Form 5344.

    Reminder:

    Follow general Examination program guidelines and procedures when evaluating taxpayer correspondence.

  2. Because the case has already aged through ACE processing (Status 24), the correct suspense date should already be present. Verify that the suspense date is correct before reassigning the case to Group B0. The suspense date will control when the case is aged to close (Status 51).

    • Reassign case to group B0.

    The case will remain in group B0 until a reply is received or the case systemically ages to default.

4.19.20.2.6.3 (01-08-2015)
Taxpayer Correspondence Received PRIOR TO the Issuance of the Statutory Notice of Deficiency - But After the Case Has Been Updated to ST 24 - CPS Generated Mailing

  1. If taxpayer correspondence is received for cases in ACE Group B0 that are scheduled to go to the Consolidated Print Site (CPS) after the case has been updated to Status 24 on AIMS but prior to the transmission of the file to the CPS.

    1. Reassign case from Group B0.

    2. Manually back the status down to Status 53 on AIMS and update RGS to Status 53.

    3. Delete the record in the Print Manager program to prevent it being transmitted to CPS (coordination with the ACE Coordinator is required).

    4. Make the following updates to RGS and AIMS using the LAP process:

    Update Update Value
    Status Code Update to Status 54, 55, 57
    Correspondence Received Date Earliest IRS received date of the taxpayer's response
    Action Text Description of action taken
    Employee Group Code Group code of Correspondence unit to which the case is assigned
    RGS Group Corresponding one to EGC

4.19.20.2.6.4 (01-08-2015)
Taxpayer Correspondence Received AFTER the Issuance of the Statutory Notice of Deficiency CPS Generated Mailing

  1. If correspondence is received after the transmission of the file to CPS, the Statutory Notice cannot be deleted.

    1. Reassign the case from Group B0.

    2. Make the following updates to RGS and AIMS using the LAP process:

    Update Update Value
    Status Code Update to Status 2498 (in RGS Only)
    Correspondence Received Date on RGS and AIMS Earliest IRS received date of the taxpayer's response correspondence
    Action text Description of action taken
    Employee Group Code Group code of Correspondence unit to which the case is assigned
    RGS Group Corresponding one to EGC

  2. Once the file has been transmitted to CPS the Statutory Notice of Deficiency will be considered as mailed even if the letter carries a future date.
    All correspondence received will be:

    • Held until the letter date of the Statutory Notice

    • Worked as priority basis based on the date of the Statutory Notice

    • Worked within 5 days of the Statutory Notice date

4.19.20.2.7 (12-04-2023)

Closing

  1. The closing filter program searches the TIF and CFOL for each case in Group B0, Status 24 or 24XX with a suspense date prior to and one (1) day forward from the day the Closing program runs.

  2. Warning lists, detailing those cases which meet ACE closing filters, are generated two weeks before for cases in Group B0 and in Status 24 or 24XX with a suspended date within 24 days from the day the closing filter program runs. The listing displays the number of days in Status 24 and lists any filter conditions present.

    1. Many of these filter conditions can be corrected prior to the suspended date and the case reintroduced to ACE processing to close when the suspense date is reached.

    2. If the filter condition cannot be corrected, the case must be removed from ACE processing and closed manually.

    Note:

    When using the warning list to identify cases that require manual closing, care must be taken to ensure that the case is not closed early.

    • Review the warning lists weekly for all reject conditions and take the actions needed to resolve the issue (i.e., make corrections and place case back into B0 or work case manually).

    • Identify cases with a Power of Attorney (POA)/Taxpayer Information Authorization (TIA) on file.

    • Update the Report Generation Software (RGS) Contacts section to reflect the POA’s/TIA’s name, address and other relevant information shown on CAF. Check the POA box to ensure that the Letter 937 and copy of the correspondence letter is generated to be sent to the authorized POA on file.

    Note:

    Ensure Letter 937 is always saved in RGS Case File Documents when issued to the taxpayer.

  3. An AMCLS command will be generated for each case in Status 24 and 24XX where the suspense date indicates that the case is ready to close. The case status is updated to 51XX in CEAS/RGS only. AIMS will not be updated to Status 51.

  4. If a case is still in B0 when the case is ready to close and it has a filter condition that prevents automated closure, the case will move to group B1 at the end of the process. A tax examiner must review, research, and address the filter conditions and close the case manually.

  5. The following fields are updated on the RGS Case Summary Record during the ACE Closing process:

    • Status Code = 51 changes to Status 90 when the interface is done

    • Status date = ACE run date

    • Action text = Auto Close

    • Action date = ACE run date

    • Historical Data = .1 (1/10) time added to the Exam time to reflect the default time

  6. The four-digit status on the RGS Case Summary Record at the time of closing will determine the Disposal Code and the Technique Code that will generate on Form 5344, Examination Closing Record.

  7. Cases that have no filter condition will have Form 5344 automatically prepared and validated, however, cases that are worked solely through the ACE process will not save Form 5344 to CEAS. The Disposal Code and the Technique Code that will generate is based on the RGS Summary Record Status.

    Status Disposal Code Technique Code
    24 10 6
    24 - telephone response 10 8
    2490 SNOD issued using AMSTUS 10 6
    2491 SNOD issued manually 10 6
    2493 Paper no reply 10 6
    2497 Unclaimed/refused 10 6
    2498 response 10 2
    2499 undeliverable 13 7

  8. Updating the RGS Case Summary Record with an additional 2 digits will generate the correct disposal code and technique code for the ACE Closing process.

  9. Once the case is closed:

    • The case will automatically archive.

    • A Closing Information Cover Sheet (CICS) is generated and printed by the Print Manager Program and forwarded to files.

    The requirements for sending closed cases to files using the CICS is different for cases that went through STN 01 versus STN 02. See IRM 4.19.21, Clerical, for disposition information.

4.19.20.2.8 (01-01-2007)

Reports

  1. Various ACE Summary reports are generated during the ACE Create, Aging, and Closing processes. Automated emails are sent to those individuals designated to receive the ACE Summary reports. The system Administrator provides the email information for each designee. Refer to ACE User Guide Revision, Part IV, Print Manager for report listings and instructions for viewing and printing the filter and inventory reports.

4.19.20.2.9 (06-26-2024)

Reviews

  1. Sites will conduct the following mandatory review of ACE cases:

    1. New RGS Program Releases and New Functionality

    • 10% or no more than 50 of the Create 1 cases produced for every project code will be processed in the first cycle of the new release

    • 10% sampling of mixed project codes in the Create 2, Aging and Closing will be processed in the first cycle of the new release

    1. Weekly reviews

    • Two Cases – per project code, per process, of cases routed to Group B0

    • 100% review of cases routed to Group B2

    Note:

    All cases for review will be randomly selected from those available. If significant problems are encountered, additional review may be needed. Review will be performed by the ACE team leader or person(s) designated by the operation. Certification of the reviews will be provided to the Operations Manager. The Operations Managers will retain a record of the certification.

  2. When performing the output review, all of the following will be considered:

    • Letter, Report, all variations of Form 886, and any schedules

    • Entity Information

    • Tax computation

    • Applicable issues addressed

    • Appropriate explanation given for each issue adjusted